How to make DIY Wedding Favours
Do you need to know how to make up your DIY wedding favours?
Try following these simple steps and good luck! If you need any further help, why not contact us through our web site and we will be happy to help. www.ukweddingfavours.com
1. Place 2 or 3 layers of tulle nets on a flat surface and align the edges exactly. (Make sure you only have the required number of nets as the very fine material is sometimes difficult to separate.) Place the sugared almonds or dragees in the curved base cup and position in the centre of the tulle nets.
2. Bring all the outer edges of the tulle together.
3. Gather in the excess material evenly.
4. Place a small rubber band over the gathered tulle nets. (this will give you two free hands to work with)
5. Take a length of ribbon and tie as tight as possible around the neck of your wedding favour. You can now remove the rubber band.
6. Separate the layers of tulle by firmly easing the bottom layer in a downward motion and the inner layer(s) in an upward motion. Do this all the way around to give a pleasing effect.
7. Finally add your favour flower centre(s) by firmly pushing into the centre so that the stems are forced down into the cavity where the almonds or sweets are. (we recommend that if more that 1 flower is to be used, these are twisted together first)
Note:
Once the favour flowers are attached you should be able to pick up the completed wedding favour by the flowers. If they come out re-tie the ribbon tighter.
Posted: December 30th, 2009 under Wedding Favours.
Tags: asian wedding favors, bomboniere, diy bomboniere, diy favours, diy nets, DIY Wedding Favours, favour nets, make your own favours, Make your own wedding favours, personalised wedding favors, traditional favours, uk wedding favours, wedding favors, wedding favours
